Time to add the latest generation of GM/Chevy trucks to the line up! Based upon the same proven capability as the Superduty, these kits are 100% engineered and fabricated in the USA and are compatible with or without OEM and B&W 5th wheel or Gooseneck bracketry (please contact us to verify fitment with other 5th and GN manufacturers). With the spacer removed this kit provides around 4" (typically) of clearance from the bottom of the airbag to the leaf spring receiver, allowing for full compression and droop travel of the leaf springs! Whether on the road or off of it, this system is a performance, ride preserving must for your GM. Tools are not required to operate any part of the system. Installation time is 2-3 hours depending on shop/basic tool amenities, and welding is not required.
Applicable to OEM or leveling Deaver leaf packs.
Note:
A minimum clearance of 7" from the tire to the face of the chassis is required.
B&W Model# compatibility: (GN #1020), (5th #2505)
Please give us a shout if you have questions. Visit our media page to see the capabilities of our airbag systems. CAD images are representative of the final design but are for reference.